CASES
Jiangsu Taixin Machinery Co., Ltd
/
/
KR150 Rotary Drilling Rig Zhejiang Tiantai Photovoltaic Power Project

Products

All categories

Contact Details

KR150 Rotary Drilling Rig Zhejiang Tiantai Photovoltaic Power Project

  • Categories:Case
  • Time of issue:2021-08-05 09:45

(Summary description)The main body of this project is located in the Meng'an Reservoir in Yizhai Pian, Baihe Town, with a total investment of 190 million yuan and an area of ​​about 569 mu.

KR150 Rotary Drilling Rig Zhejiang Tiantai Photovoltaic Power Project

(Summary description)The main body of this project is located in the Meng'an Reservoir in Yizhai Pian, Baihe Town, with a total investment of 190 million yuan and an area of ​​about 569 mu.

  • Categories:Case
  • Time of issue:2021-08-05 09:45
  • Views:
Information

TYSIM Machinery KR150 rotary drilling rig Zhejiang rooftop construction video: https://v.qq.com/x/page/s0522gyenu6.html

Construction model: KR150 Construction stratum: soil layer, mudstone

Drilling diameter: 400mm Drilling depth: 3 meters

The main body of this project is located in the Meng'an Reservoir in Yizhai Pian, Baihe Town, with a total investment of 190 million yuan and an area of ​​about 569 mu. It is currently a large-capacity power station in Tiantai County. As a new energy project, the "fishing and light complementation" project is to construct photovoltaic power generation projects on the reservoir and on the ground, install photovoltaic modules on the water or above the ground to generate electricity, use the water body for aquaculture, and use the original land for agricultural planting. ; The power generation mode that can generate electricity on the top, raise fish on the bottom, and plant the”. It is understood that the photovoltaic power station has an annual power generation capacity of about 25 million kilowatt-hours, electricity revenue of more than 26 million yuan, and an annual reduction of 24,000 tons of carbon dioxide.

 

a

A

In order to ensure that the construction period is completed on time, the customer chooses the KR150 rotary drilling drill with relatively large functions from TYSIM Machinery. The drilling depth of the TYSIM KR150 rotary drilling rig is 42m, the diameter of the large hole is 1300mm, and the weight of the whole machine is 40T. It has low energy consumption, high efficiency and convenience. The transportation and other characteristics are well recognized by customers. Because the construction is on the side of the reservoir, the geological conditions are relatively special, which is not conducive to large-scale mechanical construction. The operator is relatively cautious and careful. The construction stratum is about one meter of soft soil, and the bottom is mudstone. The construction depth is 3m and the drilling diameter is 400mm. , The machine capacity of KR150 completely exceeds its actual construction requirements. Small rotary drilling rigs such as TYSIM Machinery KR50, KR80, KR90, KR125 can also be used for smooth construction.

A

Scan the QR code to read on your phone

Related Products
Ten years of focusing on small and medium-sized piling machinery
CopyRight © 2021 Tysim Piling Equipment Co., Ltd All rights reserved.    苏ICP备13058972号   Powered by:www.300.cn   IPv6 network supported
TOP

TYSIM