CASES
Jiangsu Taixin Machinery Co., Ltd
/
/
KR125A Rotary Drilling Rig Jiangxi Hengfeng Modern Agricultural Service Housing Project

Products

All categories

Contact Details

KR125A Rotary Drilling Rig Jiangxi Hengfeng Modern Agricultural Service Housing Project

  • Categories:Case
  • Time of issue:2021-08-05 09:41

(Summary description)The project is located in Hengfeng County, Jiangxi Province. The construction stratum is sandy soil layer, red sandstone, 5-6 meters soil layer, and red sandstone downwards. The stratum is hard, and the pick double-bottom sand bucket is used for construction. The construction efficiency is faster. , The drilling depth is 23m, and the hole forming time is about 60 minutes.

KR125A Rotary Drilling Rig Jiangxi Hengfeng Modern Agricultural Service Housing Project

(Summary description)The project is located in Hengfeng County, Jiangxi Province. The construction stratum is sandy soil layer, red sandstone, 5-6 meters soil layer, and red sandstone downwards. The stratum is hard, and the pick double-bottom sand bucket is used for construction. The construction efficiency is faster. , The drilling depth is 23m, and the hole forming time is about 60 minutes.

  • Categories:Case
  • Time of issue:2021-08-05 09:41
  • Views:
Information
Construction video of TYSIM Machinery KR125A rotary drilling rig: https://v.qq.com/x/page/a0566egeqwf.html
 
Construction model: KR125A Construction ground: sand layer, red sandstone
 
Drilling diameter: 1000mm Drilling depth: 23m
 
The project is located in Hengfeng County, Jiangxi Province. The construction stratum is sandy soil layer, red sandstone, 5-6 meters soil layer, and red sandstone downwards. The stratum is hard, and the pick double-bottom sand bucket is used for construction. The construction efficiency is faster. , The drilling depth is 23m, and the hole forming time is about 60 minutes.

 

A

 

KR125A rotary drilling rig construction
 
During the construction process, due to the KR125A forming the hole too fast, the subsequent reinforcement cage and the pouring were not in place, and the drilling speed was slowed down.

 

A

 

KR125A rotary drilling rig construction
 
KR125A rotary drilling rig is a special integral transportation rotary drilling rig of TYSIM Machinery, with a large drilling depth of 37 meters, a large drilling diameter of 1.3 meters, and an output torque of 125kN.m. Its good control performance has been widely praised by customers and has been exported to many countries.

 

A

Construction of KR125A small rotary drilling rig

Scan the QR code to read on your phone

Related Products
Ten years of focusing on small and medium-sized piling machinery
CopyRight © 2021 Tysim Piling Equipment Co., Ltd All rights reserved.    苏ICP备13058972号   Powered by:www.300.cn   IPv6 network supported
TOP

TYSIM