CASES
Jiangsu Taixin Machinery Co., Ltd
/
/
KR150A Iron Tower Large Pile Diameter Construction Project

Products

All categories

Contact Details

KR150A Iron Tower Large Pile Diameter Construction Project

  • Categories:Case
  • Time of issue:2021-07-29 15:59

(Summary description)This project is a wire and iron tower pile foundation project, located in Yangzhou, Jiangsu. The geology is soil. The drilling depth is 15m and the drilling diameter is 1800mm.

KR150A Iron Tower Large Pile Diameter Construction Project

(Summary description)This project is a wire and iron tower pile foundation project, located in Yangzhou, Jiangsu. The geology is soil. The drilling depth is 15m and the drilling diameter is 1800mm.

  • Categories:Case
  • Time of issue:2021-07-29 15:59
  • Views:
Information

Construction model: KR150A Construction ground: soil layer

Drilling diameter: 1800mm Drilling depth: 15m

This project is a wire and iron tower pile foundation project, located in Yangzhou, Jiangsu. The geology is soil. The drilling depth is 15m and the drilling diameter is 1800mm. The construction model is TYSIM Machinery KR150 rotary drilling rig. Since many wire tower construction sites are field operations and the geology is relatively complex, the geology of this project is a soft soil layer, which is not conducive to large-scale mechanical construction operations. Considering the weight of the machine and the convenience of transportation, KR150 type rotary digging was finally determined.

 

A
KR150 rotary drilling rig under construction
 
In the construction process, the more difficult is the rural and field road transportation. The KR150 rotary drilling rig has a weight of 40 tons. The overall transportation and transfer are relatively convenient. With its strong power, it is relatively easy to drill the 1800mm aperture. 15m deep hole, about 90 minutes to complete, pour concrete in time after completion.

 

A

Main parameters of TYSIM Machinery KR150 rotary drilling rig, output torque: 150kN.m, drilling depth: 42/52m, machine weight: 40t, construction height: 15.9m.

 

A

KR150 rotary drilling rig

Scan the QR code to read on your phone

Related Products
Ten years of focusing on small and medium-sized piling machinery
CopyRight © 2021 Tysim Piling Equipment Co., Ltd All rights reserved.    苏ICP备13058972号   Powered by:www.300.cn   IPv6 network supported
TOP

TYSIM